Simulation analysis of thermal-stress coupling for deep hole pressure retention sampling ball valves
WANG Yingli1,2, LI Xiaoyang2, LI Bing1, SHI Shanshan2, WU Jixiu2
1. China University of Geosciences(Beijing), Beijing 100083, China; 2. Institute of Exploration Techniques, Chinese Academy of Geolofical Science, Hebei Langfang 065000, China
Abstract：The temperature and pressure inside the borehole are higher and higher with the increasing depth of the borehole. As a technical method to effectively obtain the in situ state of the underground core, the effective realization of the in situ pressure retention under the high temperature and pressure environment has become one of the key signs to test the reliability of pressure retention sampling. Thus, ball valves were selected as key devices for pressure retention sampling and simulation analysis of thermal-stress coupling, and the stress and deformation law of ball valves in the environmental parameters of [15,30] MPa and [0,250] ℃ were analyzed. The results of numerical simulation are as follows. ① The maximum equivalent stress and deformation values of three materials of 316L, 42CrMo and Inconel718 under the action of static pressure from 15 to 30 MPa were compared, and the 42CrMo was preferred as a material for the fabrication of ball valves, considering the cost of processing. ② The maximum deformation values of ball valves is increasing when the temperature is increasing from 0 ℃ to 250 ℃, but the growth rate is only 1.05%. The maximum equivalent force is increasing with slight fluctuation, showing an increasing overall trend. The maximum fluctuation is 12.76 MPa, which is in the effective sealing range of ball valves. The simulation results could provide theoretical data for the reliable sealing of pressure retention ball valves in the deep hole.
[1] 张家强,毕彩芹,徐银波,等.非常规油气地质调查工程进展与主要成果[J].中国地质调查,2023,10(1):1-19. Zhang J Q,Bi C Q,Xu Y B,et al.Progresses and main achievements on unconventional oil and gas geological survey[J].Geological Survey of China,2023,10(1):1-19. [2] 张家强,毕彩芹,李锋,等.新能源矿产调查工程进展[J].中国地质调查,2018,5(4):1-16. Zhang J Q,Bi C Q,Li F,et al.Progresses of the new energy mineral investigation project[J].Geological Survey of China,2018,5(4):1-16. [3] Wang Y X,Fu G,Lyu Q,et al.Accident case-driven study on the causal modeling and prevention strategies of coal-mine gas-explosion accidents:A systematic analysis of coal-mine accidents in China[J].Resources Policy,2024,88:104425. [4] 刘贵康,李聪,游镇西,等.煤矿井下原位磁控多向保压取心原理与技术[J].煤田地质与勘探,2023,51(8):13-20. Liu G K,Li C,You Z X,et al.Principle and technology of in-situ magnetically controlled multidirectional pressure-preserved coring in the coal mine[J].Coal Geology & Exploration,2023,51(8):13-20. [5] 郭振宇. 上覆远距离煤层卸压瓦斯地面抽采技术研究[J].能源与节能,2024(5):11-14. Guo Z Y.Surface extraction technology of depressurized gas in overlying long distance coal seams[J].Energy and Energy Conservation,2024(5):11-14. [6] 李勇,徐立富,刘宇,等.深部煤层气水赋存机制、环境及动态演化[J].煤田地质与勘探,2024,52(2):40-51. Li Y,Xu L F,Liu Y,et al.Occurrence mechanism,environment and dynamic evolution of gas and water in deep coal seams[J].Coal Geology & Exploration,2024,52(2):40-51. [7] Chen J X,Yang R Y,Li J W,et al.Numerical investigation of abrasive SC-CO2 jet for horizontal well cavity completion in deep coal seams:insights from a fluid-thermal-structural coupling model[J].Applied Thermal Engineering,2024,250:123457. [8] 刘协鲁,阮海龙,赵义,等.天然气水合物岩心保压转移与测试系统研发现状分析[J].钻探工程,2023,50(S1):26-31. Liu X L,Ruan H L,Zhao Y,et al.Analysis on research and development of gas hydrate core pressure transfer and testing system[J].Drilling Engineering,2023,50(S1):26-31. [9] 卢春华,张涛,徐俊,等.海域天然气水合物保压取心钻具的研制与试验[J].钻探工程,2023,50(6):18-26. Lu C H,Zhang T,Xu J,et al.Development and experiment of pressure core sampler for marine natural gas hydrates[J].Drilling Engineering,2023,50(6):18-26. [10] Li W B,Li X,Zhao S X,et al.Evaluation on carbon isotope fractionation and gas-in-place content based on pressure-holding coring technique[J].Fuel,2022,315:123243. [11] Zhao S X,Lu S F,Wu J F,et al.Comparison and verification of gas-bearing parameter evaluation methods for deep shale based on the pressure coring technique[J].Energy & Fuels,2023,37(3):2066-2077. [12] 杨柳青,陈文才,曾欣.深层超深层取心技术进展与未来解决方案[J].钻采工艺,2024,47(2):113-120. Yang L Q,Chen W C,Ceng X.Progress and future solutions of deep and ultra-deep coring technology[J].Drilling & Production Technology,2024,47(2):113-120. [13] 焦杨,孙少亮,高培丞,等.80 MPa保压取心工具的研制与应用[J].钻采工艺,2023,46(2):112-117. Jiao Y,Sun S L,Gao P C,et al.Development and application of 80 MPa in-situ pressure-preserved coring tool[J].Drilling & Production Technology,2023,46(2):112-117. [14] 杨立文,苏洋,罗军,等.GW-CP194-80A型保压取心工具的研制[J].天然气工业,2020,40(4):91-96. Yang L W,Su Y,Luo J,et al.Development and application of GW-CP194-80A pressure-maintaining coring tool[J].Natural Gas Industry,2020,40(4):91-96. [15] 朱庆忠,苏雪峰,杨立文,等.GW-CP194-80M型煤层气双保压取心工具研制及现场试验[J].特种油气藏,2020,27(5):139-144. Zhu Q Z,Su X F,Yang L W,et al.Development and field test of GW-CP194-80M CBM dual pressure coring tool[J].Special Oil and Gas Reservoirs,2020,27(5):139-144. [16] Xie H P,Hu Y Q,Gao M Z,et al.Research progress and application of deep in-situ condition preserved coring and testing[J].International Journal of Mining Science and Technology,2023,33(11):1319-1337. [17] 任红,裴学良,吴仲华,等.天然气水合物保温保压取心工具研制及现场试验[J].石油钻探技术,2018,46(3):44-48. Ren H,Pei X L,Wu Z H,et al.Development and field tests of pressure-temperature preservation coring tools for gas hydrate[J].Petroleum Drilling Techniques,2018,46(3):44-48. [18] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 26147-2010,球阀球体技术条件[S].北京:中国标准出版社,2011. General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China,Standardization Administration of the People's Republic of China.GB/T 26147—2010 Specification for Ball of Ball Valve[S].Beijing:Standards Press of China,2011.
2024, Vol. 11 
