|
|
|
| Application of cross-diameter wireline corer drilling tool in deep hole geological core drilling |
| ZENG Simin, YANG Yongshun*, ZHANG Bingqiang, E Bosijia, ZHAO Shentong, CAO Shuping |
| Xining Natural Resources Comprehensive Survey Center of China Geological Survey,Xining Qinghai 810000,China |
|
|
|
|
Abstract In the drilling construction of deep hole geological core, the traditional drilling tool of same-diameter wireline corer has technical problems of inefficient drilling, narrow tubular annulus, and high defective rate under complex geological environment, restricting the deep hole drilling development. By optimizing the combination of drilling pipe and drilling bit, the authors in this research developed cross-diameter wireline corer drilling tool, and systematically analyzed the mechanical characteristics. The stress distribution and torsional stiffness under different diameter combinations were identified through mechanical modeling and experimental verification, and drilling tool optimization scheme was constructed. The engineering practices of a rare earth mine exploration, shale gas exploration in Sichuan Basin and Pu'er geothermal well in Yunnan Province shows that the cross-diameter drilling tool could bear high torque of 8 000 N·m and drilling pressure of 200 kN, with the maximum drilling depth of 1 500 m. And this cross-diameter drilling tool show good stability under high temperature of 200 ℃ and high pressure of 30 MPa, with the drilling efficiency rising 35% and the core acquisition rate reaching 98%. The research results provide new solutions for technical problems during deep hole geological core drilling, and important practice guidance for improving deep geological exploration efficiency and core collection quality.
|
|
Received: 14 October 2024
|
|
|
|
|
|
[1] 高希坤,赵大军,陈勇.基于机器学习的水平孔绳索取心钻进钻压预测模型[J].地质论评,2023,69(S1):559-560.
Gao X K,Zhao D J,Chen Y.Prediction model of weight on bit for wire-line coring drilling of horizontal hole based on machine learning[J].Geological Review,2023,69(S1):559-560.
[2] 潘德元,贺前平,蔡隽,等.绳索取心满眼管柱的力学模型优化与应用[J].力学与实践,2023,45(3):585-591.
Pan D Y,He Q P,Cai J,et al.Optimization and application of mechanical model of wire coring string with packed hole assembly[J].Mechanics in Engineering,2023,45(3):585-591.
[3] 郑凯歌,孙四清,龙威成,等.地面钻井煤层气含量样品原位密闭取心装置及工艺研究[J].煤炭工程,2022,54(10):141-145.
Zheng K G,Sun S Q,Long W C,et al.In-situ sealed coring device and technology of CBM content sample in ground drilling[J].Coal Engineering,2022,54(10):141-145.
[4] 廖远苏,胡啟锋.一种隔水隔卡的自锁式绳索取心钻具及应用[J].煤田地质与勘探,2021,49(4):278-286.
Liao Y S,Hu Q F.Introductions and applications of a self-locking wire-line coring system with a water-shielding bit and a circlip-shielded core barrel[J].Coal Geology & Exploration,2021,49(4):278-286.
[5] 范国强,秦宇龙,詹涵钰,等.四川攀西地区稀土资源成矿规律及找矿靶区[J].中国地质调查,2022,9(1):23-31.
Fan G Q,Qin Y L,Zhan H Y,et al.Metallization regularity and prospecting target area in Panzhihua-Xichang area of Sichuan Province[J].Geological Survey of China,2022,9(1):23-31.
[6] 赵芝,王登红,刘善宝,等.四川省牦牛坪矿床外围氟碳铈矿-萤石-重晶石-方解石脉型稀土矿石的发现及其意义[J].中国地质调查,2023,10(5):9-16.
Zhao Z,Wang D H,Liu S B,et al.Discovery of the bastnaesite-fluorite-barite-calcite type REE ore in the periphery of Maoniuping deposit in Sichuan Province and its significance[J].Geological Survey of China,2023,10(5):9-16.
[7] 孟祥森,蔡顺山,董瑞.不分散低固相钻井液在车排子地区铀矿绳索取心钻进中的应用研究[J].铀矿地质,2023,39(4):700-706.
Meng X S,Cai S S,Dong R.Application research on non-dispersible low-solid drilling fluid in wire-line coring drilling for uranium exploration in Chepaizi Area[J].Uranium Geology,2023,39(4):700-706.
[8] 陆卫星. 绳索取心钻具在声频环保取样钻机中的应用研究[J].地质装备,2023,24(1):9-12.
Lu W X.Research on the application of wireline coring tool in acoustic environmental sampling drilling rig[J].Equipment for Geotechnical Engineering,2023,24(1):9-12.
[9] 龚恩德,邓祖保,张正.涌水地层绳索取心钻进泥浆处理方法与应用[J].安徽地质,2022,32(4):331-333.
Gong E D,Deng Z B,Zhang Z.Mud treatment for wireline coring drilling in water-gushing formation and application of the method[J].Geology of Anhui,2022,32(4):331-333.
[10] 欧涛,郭如伦,王志祥,等.绳索取心液动锤在全漏失孔和返水孔中应用效果对比[J].四川地质学报,2022,42(S2):192-196.
Ou T,Guo R L,Wang Z X,et al.Comparative analysis of hydraulic hammers in fully lost and backflow holes in rope coring[J].Acta Geologica Sichuan,2022,42(S2):192-196.
[11] 中国地质科学院勘探技术研究所. DZ/T 0227—2010地质岩心钻探规程[S].北京:中国标准出版社, 2010.
Institute of Exploration Technology of Chinese Academy of Geological Sciences.DZ/T 0227—2010 Geological core drilling regulations[S].Beijing:Standards Press of China, 2010.
[12] 王林杰. 绳索取心技术在六盘水煤层气参数井勘探中的应用[J].内蒙古石油化工,2021,47(8):55-58.
Wang L J.Application of wireline coring technology in exploration of coalbed methane parameter wells in Liupanshui[J].Inner Mongolia Petrochemical Industry,2021,47(8):55-58.
[13] 李冰乐,王胜,袁长金,等.复杂山区水平绳索取心定向钻进聚合醇绿色防塌冲洗液研究[J].钻探工程,2023,50(6):85-91.
Li B L,Wang S,Yuan C J,et al.Research on polymer alcohol anti-collapse flushing fluid for directional drilling of horizontal wire-line coring in complex mountain areas[J].Drilling Engineering,2023,50(6):85-91.
[14] 杨芳,张明德,王勇军,等.深部钻探绳索取心跨口径钻具的应用研究与拓展[J].钻探工程,2023,50(4):25-31.
Yang F,Zhang M D,Wang Y J,et al.Research and development of cross-diameter wire-line coring system in deep drilling[J].Drilling Engineering,2023,50(4):25-31.
[15] 张小平,石绍云,梁俊俊,等.超长水平孔绳索取心定向纠斜钻进及测井技术研究示范[J].钻探工程,2023,50(S1):211-217.
Zhang X P,Shi S Y,Liang J J,et al.Research and demonstration of wire-line coring directional deviation correction drilling and logging technology for ultra-long horizontal hole[J].Drilling Engineering,2023,50(S1):211-217.
[16] 杨联锋,彭志平,宋振杰,等.深厚覆盖层绳索取心钻探工艺实践[J].钻探工程,2023,50(S1):274-280.
Yang L F,Peng Z P,Song Z J,et al.Application practice of wire-line core drilling technology for deep and thick overburden strata[J].Drilling Engineering,2023,50(S1):274-280.
[17] 潘建生,陈宗耀,杨彦鹏,等.南陵地区深孔绳索取心工艺及钻井事故预防技术探索[J].地质装备,2023,24(4):21-26.
Pan J S,Chen Z Y,Yang Y P,et al.Exploration of deep hole wireline coring and drilling accident prevention technique in Nanling area[J].Equipment for Geotechnical Engineering,2023,24(4):21-26. |
|
|
|
2024, Vol. 11 
